Worldwide supplier of high quality electrical / electronic components

Konform^® Conformal Coatings

Konform^® Conformal Coatings are used for spray, dip tank and brush applications. They protect printed circuit boards, components and flex circuitry from damage. These coatings provide excellent electrical insulation properties that withstand hot and cold operating environments, as well as heat generated by electronic circuitry. All Konform^® conformal coatings contain a UV indicator for improved quality assurance. They offer high dielectric strengths of 1100 volts/mil or more. These tough, transparent coatings will not fragment, chip or crack, thereby providing excellent protection. All are convenient and ready to use — no mixing is required.

Konform^® Conformal Coatings are engineered for applications in:

• Aerospace, marine manufacturing, electrical equipment, instrumentation and data communication
• Printed circuit board and flex circuit protection
• Withstanding severe environmental stress, thermal shock, mold and fungus attack

Konform® LED Konform® LED is a silicone conformal coating designed for light emitting diode (LED) applications, where a completely transparent coating is required to provide a tough, protective coating. Ideal for LED lights, displays and controls, especially when used in outdoor or other extreme environments. Konform® LED provides maximum flexibility for extreme temperatures on the flex and rigid circuitry found in LED displays. Cured coatings are hydrolytically stable and retain their physical electrical properties after high temperature and humidity exposure. Part No. Size 49-CTLED-P 1 pt / 0.5 L container 49-CTLED-1 1 gal / 3.7 L container 49-CTLED-5 5 gal (18.5 liters) container Konform® SR High Viscosity Konform® SR High Viscosity provides maximum coverage where good flexibility is required, or where extreme temperatures can be encountered. This transparent coating provides ideal protection for both rigid and flexible printed circuit boards. Cured coatings are hydrolyticly stable and retain their physical electrical properties after high temperature and humidity exposure. Konform® SR High Viscosity will not stress delicate circuit components. Part No. Size 49-CTSRHV1 1 gal / 3.7 L container Konform® SR Medium Viscosity Konform® SR Medium Viscosity provides maximum coverage where good flexibility is required, or where extreme temperatures can be encountered. This transparent coating provides ideal protection for both rigid and flexible printed circuit boards. Cured coatings are hydrolyticly stable and retain their physical electrical properties after high temperature and humidity exposure. Konform® SR Medium Viscosity will not stress delicate circuit components. Part No. Size 49-CTSRMV5 5 gal / 18.5 L container Konform® Ultra Konform® Ultra Fast Dry Acrylic Conformal Coating is formulated to provide maximum process throughput while also maximizing insulation protection against high-voltage arcing and corona shorts. The product dries to the touch rapidly allowing for fast and efficient handling. This extremely effective acrylic conformal coating provides a hard, durable protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. Coating meets IPC-CC-830B Class B and sections of MIL-I-46058C, Type AR. Part No. Size 49-CTUFD-12 11.5 oz. / 326 g aerosol 49-CTUFD1 1 gal / 3.7 L container 49-CTUFD5 5 gal / 18.5 L pail Konform® UR-A Konform® UR-A water-based urethane conformal coating is designed to deliver outstanding conformal coating protection using a water-based carrier. It is engineered for applications where durability and environmental protection against moisture and air-borne contaminants are required, while minimizing the use and impact of VOC’s. This extremely effective conformal coating provides protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. Coating meets IPC-CC-830B Class B and sections of MIL-I-46058C, Type UR. Part No. Size 49-CTURA1 1 gal / 3.7 L container 49-CTURA5 5 gal / 18.5 L pail Konform® SR Konform® SR provides maximum flexibility for extreme temperatures. This transparent coating provides ideal protection for both rigid and flexible printed circuit boards. Cured coatings are hydrolytically stable and retain their physical electrical properties after high temperature and humidity exposure. Konform® SR will not stress delicate circuit components. Part No. Size 49-CTSR-12 10 oz. (413 ml) aerosol 49-CTSR1 1 gal / 3.7 L container 49-CTSR-5 5 gal (18.5 liters) container Konform® AR Konform® AR is ideal for providing insulation against high-voltage arcing and corona shorts. This extremely effective acrylic conformal coating provides a hard, durable protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. Konform® AR resin meets MIL-I-46058C, Type AR. Part No. Size 49-CTAR-12 11.5 oz. (429 ml) aerosol 49-CTAR1 1 gal / 3.7 L container Konform® Flexcoat Konform® Flexcoat Conformal Coating is designed for applications where flexibility and protection are paramount. This material is as flexible as an RTV silicone, but without the disadvantages of a silicone. Providing a soft, rubbery protective coating, this material will coat evenly and provide a flexible and durable protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. This coating can be removed by cutting a small section and peeling the coating away from the surface, or by solvent immersion of the whole board. Coating meets IPC-CC-830B Class B. Part No. Size 49-CTFC-12 11.5 oz. aerosol 49-CTFC-1 1 gal / 3.7 L container 49-CTFC-5 5 gal / 18.5 L pail Konform® HR Konform® Flexcoat Conformal Coating is designed for applications where flexibility and protection are paramount. This material is as flexible as an RTV silicone, but without the disadvantages of a silicone. Providing a soft, rubbery protective coating, this material will coat evenly and provide a flexible and durable protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. This coating can be removed by cutting a small section and peeling the coating away from the surface, or by solvent immersion of the whole board. Coating meets IPC-CC-830B Class B. Part No. Size 49-CTHR1 1 gal / 3.7 L container 49-CTHR5 5 gal / 18.5 L pail