Features
  • Permanickel contact
  • Stainless steel 1/4" diameter shaft
  • Gold plated terminals
  • Internal tracking surfaces gold plated
  • Precision winding with excellent linearity
  • Spectrol 535 Series

    Potentiometer - 2.3 Watt, 7/8" round
    case, 1/4" dia. shaft, 5 turn, precision
    wirewound
    Photo of 535 Series Potentiometer

    Spectrol No. NTE Part No. Value
    Ohms
    Shaft
    Length
    Diag.
    No.
    535-1-1-101 502-0145 100 7/8" P12
    535-1-1-201 502-0146 200 7/8" P12
    535-1-1-501 502-0147 500 7/8" P12
    535-1-1-102 502-0148 1K 7/8" P12
    535-1-1-202 502-0149 2K 7/8" P12
    535-1-1-502 502-0150 5K 7/8" P12
    535-1-1-103 502-0151 10K 7/8" P12
    535-1-1-203 502-0152 20K 7/8" P12
    535-1-1-503 502-0153 50K 7/8" P12

    Resistance Element Data
    Resistance
    Value
    (Ohms)
    Resolution
    (%)
    Ohms
    per Turn
    Max Current
    @ 70°C
    Ambient
    (mA)
    Max
    Voltage
    Across Coil
    (Volts)
    100 .075 .0746 122.00 12.2
    200 .061 .1220 86.60 17.3
    500 .049 .2549 54.70 27.4
    1K .041 .4113 38.70 38.7
    2K .031 .6331 27.40 54.8
    5K .034 1.7230 17.30 86.6
    10K .030 3.0160 12.20 122.0
    20K .020 3.9910 8.66 173.0
    50K .015 7.4560 5.47 274.0

    Dimensional Drawing

    P12

    Schematic Diagram

    Specifications
    Electrical
    Resistance Range: 50 Ohms to 50K Ohms
    Resistance Tolerance: ±5%
    Linearity Tolerance: ±0.25% independent
    Noise: 100 Ohms ENR
    Rotation: 1800°, +10°, -0°
    Power Rating: 1.5W @ +70°C derated to 0W @ +125°C
    Insulation Resistance: 1000 Meg Ohm min, 500VDC
    Dielectric Strength: 1000V RMS min 50Hz
    Absolute Minimum Resistance: Not to exceed linearity x total resistance or 1 Ohm, whichever is greater
    Temperature Coefficient of Resistance: 20ppm/°C (wire Only)
    End Voltage: 0.25% of total applied voltage, max

    Mechanical
    Bearing Type Bushing: Sleeve bearing
    Resistance Element: See Table
    Rotation: 1800°, +10°, -0°
    Starting Torque (maximum): 50 gm-cms (0.7 oz in)
    Stop Strength (static): 5.4 Kgm-cm (75 oz in)
    Rotation Life: 500,000 shaft revolutions

    Environmental
    Operating Temperature: -55° to +125°C
    Load Life: 900 hr.

      Home  Back  Index