Cable Management Solutions
ICC Part No. Description

Black
ICCMSR1936
ICCMSR1948
ICCMSR1972
ICCMSR1984

Aluminum
ICCMSA1936
ICCMSA1948
ICCMSA1972
ICCMSA1984

 Distribution Racks

3 ft. (36 in.) Rack
4 ft. (48 in.) Rack
6 ft. (72 in.) Rack
7 ft. (84 in.) Rack


3 ft. (36 in.) Rack
4 ft. (48 in.) Rack
6 ft. (72 in.) Rack
7 ft. (84 in.) Rack

EIA standard 19" racks are designed for the ultimate in configuration flexibility. The 6061-T6 high-strength aluminum alloy makes ICC racks lightweight and durable with excellent grounding characteristics. Available in black powder coated aluminum and natural aluminum.

The 19" Standard rack includes:
  • Roll-tapped threading (12-24 Standard) on both front and back
  • Two angled, top cross-members for maximum strength
  • 30 high quality, pilot point screws included
  • Assembly holes with steel threads to prevent any stripping during assembly
  • Slotted hole design on the base for easy adjustment
  • Easy Assembly
  • Compatible with any cabinet or rack that conforms to EIA-310-D spacing standard specifications (5/8" x 5/8" x 1/2")


ICCMSCMR48
ICCMSCMR84		 Cable Management Rack
Rack with 6" Wide Side Rails and Extra Cable Management, 4 ft.
Rack with 6" Wide Side Rails and Extra Cable Management, 7 ft.

Comes complete with 6" Cable Channel along both sides of the rack to manage and conceal bulk cable vertically along the inside of the rack. The rack has several Cable Tie anchor points throughout the cable channel to secure cable bundles with VELCRO ties. Unique design allows this rack to accommodate raised floor configurations and support heavy data and electronic equipment.
  • 10-32 tapped mounting holes on front and rear of rack
  • Two top cable troughs support and route large amounts of cable maintaining minimum bend radius
  • Easy assembly
  • 6" side Cable Channels concealing routed bulk cable
  • Incorporated cable tie anchor points
  • Cable Management rings that mount to the front or rear of the rack and be rotated to provide additional vertical organization
  • Slotted hole design on the base for easy adjustment
  • Assembly holes with steel threads to prevent stripping during assembly
  • VELCRO cable ties
  • 10-32 Mounting screws
  • Compatibility with any item that conforms to EIA-310-D spacing standard specifications (5/8" x 5/8" x 1/2")

ICCMSRKP10 Keyboard Tray with Mouse Shelf
Keyboard tray is equipped with a built in mouse tray that can be pulled out to either the right or the left side. The mouse tray retracts out of the way when not in use.
ICCMSRKS10 Keyboard Tray
Tray slides in and out on ball bearing tracks for easy access. Made of high quality steel and is coated with a durable black powder finish. Mounting hardware is included.

ICCMSRSF10
ICCMSRSF15
ICCMFRSF20
ICCMFRSF30		 Rack Shelves
10" Single Shelf (75 lbs. capacity)
15" Single Shelf (75 lbs. capacity)
20" Double Shelf (125 lbs. capacity)
30" Double Shelf (125 lbs. capacity)

Designed to exceed the practical weight requirements of any communications closet. Single shelf unit easily accommodates bulky equipment. Double shelf unit is perfect for bigger and heavier equipment including computers, modems, or muxes. All shelves are coated with a durable black powder finish. Mounting hardware is included.


ICCMSRSV10
ICCMSRSV15
ICCMFRDV20
ICCMFRDV30		 Vented Shelves
10" Single Vented Shelf (50 lbs. capacity)
15" Single Vented Shelf (50 lbs. capacity)
20" Double Vented Shelf (100 lbs. capacity)
30" Double Vented Shelf (100 lbs. capacity)

Designed to provide airflow to ventilate mounted equipment. Made of high quality steel and are coated with a durable black powder coat finish. Mounting hardware is included.


ICCMSHDS20		 Heavy Duty Shelves
20" Heavy Duty Equipment Shelves (250 lbs. capacity)

Designed to hold up to 250 lbs., making it ideal for mounting heavier data and electronic equipment. Brackets are adjustable making this shelf compatible with either 3" or 6" Rack rails.


ICCMSCMP31		 1.75" Ring Panel
4 Horizontal Rings, 2 Vertical Rings, 1 RMS

Combines four horizontal and two vertical distribution rings for patch cord organization.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMP32		 3.5" Ring Panel
4 Horizontal Rings, 4 Vertical Rings, 2 RMS

Combines four horizontal and four vertical distribution rings for patch cord organization.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMP41		 1.75" Clip Panel
2 Vertical Rings, 24 Plastic Clips, 1 RMS

Combines two vertical distribution rings with 24 individual routing clips for patch cord organization and guidance.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMP42		 3.5" Clip Panel
4 Horizontal, 4 Vertical Rings, 24 Plastic Clips, 2 RMS

Combines four horizontal and four vertical distribution rings with 24 individual routing clips for patch cord organization and guidance.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMP51		 1.75" Interbay Panel
5 Horizontal Rings, 1 RMS

Reduces cable bundle congestion and tension. Large ring openings allow for easier cable access at the front or the back of the distribution rack.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMP52		 3.5" Interbay Panel
5 Horizontal Rings, 2 RMS

Reduces cable bundle congestion and tension. Large ring openings allow for easier cable access at the front or the back of the distribution rack.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMPB1
ICCMSCMPB2		 Blank Panels
1.75" x 19" Blank Panel, 1 RMS
3.5" x 19" Blank Panel, 2 RMS

Designed to fill the open space between system panels on a standard 19" rack.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSCMPR1
ICCMSCMPR2
ICCMSCMPR3
ICCMSCMPR4		 Vertical Rings
Small Ring
Large Ring
Cable Management Ring, 3"
Cable Management Ring, 6"

Provide high flexibility for front or back vertical cable management. Typically mounted directly to the vertical rails of a 19" rack, or on the sides of any ICC Hinged Wall Mount Bracket. When mounted, the rings extend from the panel providing a vertical path for cable or patch cord management.


ICCMSCMPL1
ICCMSCMPL2		 "L" Brackets
Standoff Cable Tie Bracket, Black
Standoff Cable Tie Bracket, Aluminum

Manufactured with strong lightweight aluminum that easily mounts to any standard EIA compliant hole spacing. The brackets come in either regular aluminum or powder coated black and have cutouts that make it easy to incorporate Velcro or plastic cable ties for custom vertical or horizontal cable management.


ICCMPP35RMB		 Rack Mount Rear Cable Management Bar
Rack Mount Rear Management Bar

Can be mounted directly to the rack. It has cable tie anchor points for Velcro tie enabling cable routing in any direction to organize and firmly secure the cables.


ICCMSE45RB		 Extended Cable Management Bracket
Extended Cable Management Bar

Designed to provide substantially more strain relief cabling, especially shielded cabling. Brackets can be mounted on the rear of the rack to provide cable support or can be mounted to the front of the rack over a patch panel to provide management and support to patch cords while not taking any rack space. At each end of the Bracket there is a 1" bend radius to protect cable when routed to a vertical position. The bracket is equipped with several Velcro Tie anchor points to easily secure, route and organize multiple cables.


ICCMSCC3BK
ICCMSCC3SV		 Cable Channel
Cable Channel, 3 ft., Black
Cable Channel, 3 ft., Aluminum

A rack accessory featuring swivel latches and anchoring points for either cable ties or VELCRO ties to provide cable management and routing up and down a rack. Comes in a 3-foot section made of .090" aluminum with mounting holes that allow it to be attached to any size rack using the provided bolts. This is a perfect item to use between racks where there is a large amount of cable being routed and terminated. The cable channel has other mounting features that allow two sections to be fastened together to make a longer channel and will accommodate taller racks. Features include:  back-to-back mounting option to accommodate cable management in front and rear or rack. Stack two cable Channels to accommodate large racks.


ICCMSHB1RS
ICCMSHB2RS
ICCMSHB3RS
ICCMSHB4RS
ICCMSHB6RS
ICCMSHB8RS		 Hinged Wall Mount Brackets
Wall Mount Bracket, 1.75" ht., 1 RMS
Wall Mount Bracket, 3.5" ht., 2 RMS
Wall Mount Bracket, 5.25" ht., 3 RMS
Wall Mount Bracket, 7" ht., 4 RMS
Wall Mount Bracket, 10.5" ht., 6 RMS
Wall Mount Bracket, 14" ht., 8 RMS

Can be mounted directly on walls. The 19" wide wall mount brackets are manufacturing with a 6" depth to provide easy cable management, and prevent excessive bending of cables in accordance with TIA-568-A standards. The wall mount brackets also provide a rear cable entry opening and hinged panel mount tab design to provide easy cable access. The ICCMSHB uses the standard EIA hole pattern and provides cable tie anchors to secure cable bundles with Velcro.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSVHB06
ICCMSVHB08
ICCMSVHB18		 Vertical Hinged Wall Mount
Bracket, 6 RMS, 10.5" ht., 12" Deep (40 lbs. load capacity)
Bracket, 8 RMS, 14" ht., 12" Deep (60 lbs. load capacity)
Bracket, 8 RMS, 14" ht., 18" Deep (60 lbs. load capacity)

Ideal for wall-mounting patch panels and network equipment. The Vertical Hinged Brackets offer rear access, which facilitates punching down, simplifying an installation. There are cable tie points throughout the Vertical Hinged Bracket for cable management. The sturdy all steel construction is finished in a durable black powder coat. Rack screws and Velcro tie loops are included. Offered in 12" and 18" depths with 6 or 8 Rack Mount Space. Also available is a Top Cover to keep out dust (optional).

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSWMR08
ICCMSWMR15
ICCMSWMR30		 Wall Mount Rack
19" Wide, 18" Deep, 8 RMS
19" Wide, 18" Deep, 15 RMS
19" Wide, 18" Deep, 30 RMS

This self-squaring rack can be used for mounting virtually any data or telecommunications component. The all-steel Wall mount Relay Rack is quick and easy to assemble and finished in a durable black powder coat. The rack is offered in an 18" depth with Rack Mount Space ranging from 8 space to 30 space. Includes rack screws. All wall mount racks feature 125-lbs. load capacity.

Note:  1 RMS = 1 rack mount space, 1.75"


ICCMSSGR21
ICCMSSGR22		 Swing Gate Rack
19" Wide, 18" Deep, 12 RMS
19" Wide, 18" Deep, 20 RMS

Allows installers to swing equipment out once equipment is mounted on rack, simplifying wiring tasks. Cable tie points and Velcro tie loops can neatly organize routed cable throughout the rack, while a 150 lb. Capacity provides enough strength to hold heavy equipment. Punching down can be accomplished while the unit is completely opened. The swing Gate Wall Mount Rack comes in 18" depths, and 12 and 20 Rack Mount Space with black powder coat finish. 10-32, rack screws and Velcro tie included.

Note:  1 RMS = 1 rack mount space, 1.75"

  Home  Back