NTE5332 & NTE5334
Single Phase Bridge Rectifier
1 Amp

Features:

• Ideal for Printed Circuit Board
• High Temperature Soldering Guaranteed:  +285°C/10sec at 5lbs., (2.3kg) Tension
• Surge Overload Rating: 50A (Peak)
• Glass Passivated Chip Junctions

Maximum Ratings and Electrical Characteristics: (T_A = +25°C unless otherwise specified. Single Phase, Full Wave, 60Hz, Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.)

Maximum Recurrent Peak Reverse Voltage, PRV             NTE5332             NTE5334	600V 1000V
Maximum RMS Bridge Input Voltage             NTE5332             NTE5334	420V 700V
Maximum DC Blocking Voltage             NTE5332             NTE5334	600V 1000V
Maximum Average Forward Output Current (TA = +40°C), IF(AV)	1A
Peak Forward Surge Current, IFSM             (8.3ms Single Sine-Wave Superimposed on Rated Load)	50A
Rating for Fusing (t < 8.35ms), I2t	10A2s
Maximum Forward Voltage Drop (Per Bridge Element, IF = 1A), VF	1.2V
Maximum Reverse Current (At Rated DC Blocking Voltage per Element, TA = +25°C), IR	10µA
Maximum Reverse Current (At Rated DC Blocking Voltage per Element, TA = +100°C), IR	500µA
Typical Junction Capacitance Per Element (Note 1), CJ	25pF
Operating Junction Temperature Range, TJ	-65° to +150°C
Storage Temperature Range, Tstg	-65° to +150°C
Thermal Resistance, Junction-to-Ambient (Note 2), TthJA	40°C/W

Note 1. Measured at 1MHz and applied reverse voltage of 4V.
Note 2. Thermal Resistance from Junction-to-Ambient mounted on a PC board with 0.5" x 0.5" (13mm x 13mm) copper pads.

Basic Circuit for Bridge Rectifiers

  Home  Index  Back