Proper maintenance is critical to insure reliable circuitry. Not only unsightly, some flux residue can promote short circuits and corrosion, degrading or destroying the printed circuit board. The type of flux to be removed, solvent compatibility and ease of application are all factors to consider when choosing the appropriate product. Flux-Off® is available in aerosol, BrushClean™ System, and liquid form for vapor degreasers, spray systems, ultrasonics, and dip tank applications.
All aerosols can be sprayed in any direction, even upside down. Look for the “All-Way Spray” icon on the can.
Flux-Off® products are specially formulated to remove all types of rosin (types R, RA and RMA), no-clean, water soluble and synthetic (type SA) flux.
Recommended for:
Post-solder operations
PC boards
Sensitive circuit components
Component leads
SMD pads
Chip carriers
Plugs, sockets and heat sinks
Thru-hole and SMT devices
Screens and stencils
Work areas
Flux-Off No Clean EXTRA Flux Remover is a low VOC extra strength solvent that removes light or heavy encrusted flux deposits. The high pressure aerosol penetrates quickly to remove most types of fluxes, oxide particles, dust, grease and oil, then evaporates quickly leaving no residues.
Part No.
Size
49-ES888B
10 oz. / 284 g BrushClean aerosol
Flux-Off® Delta™ Flux Remover is an extra strength nonflammable solvent that removes heavy and encrusted flux deposits. Penetrates residues quickly to remove all types of flux, production contaminants, dust, and oil, then evaporates quickly leaving no residues.
Flux-Off® Delta Flux Remover has been engineered with Delta chemistry - new powerful precision cleaning solutions that are ideal replacements for AK225 and other chemicals. New environmental restrictions have forced facilities to search for and evaluate new cleaning products. With Chemtronics Delta Precision Solvent Cleaners, change is good… really good!
Part No.
Size
49-DEL1692
12 oz / 340 g aerosol
49-DEL892B
6 oz / 170 g BrushClean™ System
49-DEL192
1 gal / 3.7 L liquid
49-DEL592
5 gal (18.5 liters) pail
49-DEL5592
53 gal / 200 L drum
Flux-Off® VZ Flux Remover is a highly effective cleaner for removing rosin-based fluxes from electronic components and assemblies. The non-ozone depleting Verizane™ solvent system utilizes Vertrel® Specialty Fluid from Dupont® to quickly removes flux without harming sensitive materials.
VERIZANE™ Cleaning Chemistry (VZ)
Chemtronics’ most economical line of ozone safe cleaning solutions. Engineered to replace HCFC-141b, these low odor, no flash, nonflammable aerosols offer the most cleaning value for your money.
So ditch the dirt — without blowing your budget!
Part No.
Size
49-ES6200
12 oz / 340 g aerosol
49-ES6201
1 gal / 3.7 L container
49-ES6255
53 gal / 200 L drum
Flux-Off® No Clean Plus Flux Remover is an extra strength solvent that removes heavy and encrusted flux deposits. This high pressure aerosol or bulk liquid penetrates quickly to remove all types of flux, oxide particles, dust, grease and oil, then evaporates quickly leaving no residues.
Part No.
Size
49-ES896B
6 oz / 170 g BrushClean™ System
49-ES1696
12 oz./ 340 g aerosol
49-ES196
1 gal / 3.7 L container
49-ES596
5 gal (18.5 liters) pail
49-ES5596
55 gal. / 208 L liquid
The Flux-Off® Rosin formulation is a fast drying aerosol that quickly and completely removes R, RMA, RA, and synthetic flux residue. With its low surface tension and superior wetting properties, Flux-Off® Rosin removes harmful residues in tight tolerance areas.
Part No.
Size
49-ES1035
10 oz. / 283 g aerosol
49-ES1035B
10 oz / 283 g BrushClean™ System
49-ES835B
5 oz / 141 g BrushClean™ System
49-ES135
1 gal / 3.7 L container
49-ES535
5 gal (18.5 liters) pail
49-ES5535
55 gal / 203 L drum
The Flux-Off® Water Soluble is a proprietary blend of powerful cleaning solvents. This defluxing agent removes R, RMA, RA, OA, and synthetic flux residues, as well as ionic and non-ionic soils.
Part No.
Size
49-ES1530
13.5 oz. / 385 g aerosol
49-ES130
1 gal / 3.7 L container
IPA – Isopropyl Alcohol is a highly effective, general use cleaning solvent that is used to clean a variety of substrates and remove a variety of soils. This 99% pure IPA is available in a variety of sizes for all types of use.
Part No.
Size
49-ES820L
8 fl oz./ 236 ml L flip-top bottle
49-ES105
1 gal / 3.7 L container
Flux-Off® Tri-V Flux Remover is an extra strength nonflammable solvent that removes heavy and encrusted flux deposits. This solvent system is engineered to remove all types of flux types while evaporating quickly and leaving no residues. Tri-V replacement chemistry is an innovative new chemistry that does not contain any n-propyl bromide, TCE or any ozone depleting compounds.
Note: As with all vapor degreaser equipment and processes, observe all safety precautions, guidelines and operating rules associated with these units. Failure to do so may put operations personnel at risk. Avoid excessive vapor losses, loss of refrigeration, excessive boil sump heat, etc. Make sure all equipment is operated in accordance with the manufacturer’s guidelines and instructions. If in doubt, contact your manufacturer immediately.
Part No.
Size
49-VVV195
1 gal / 3.7 L container
49-VVV595
5 gal / 19 L container
49-VVV5595
53 gal / 200 L drum
Flux-Off® CZ Flux Remover is a highly effective cleaner for removing rosin-based fluxes from electronic components and assemblies. Utilizing Cirozane™, which is based on new HFE technology, this nonflammable, non-ozone depleting aerosol quickly removes flux without harming sensitive materials.
CIROZANE™ Cleaning Chemistry (CZ). Proprietary Solutions From Chemtronics.
Now, with CIROZANE CFC / HCFC Replacement chemistry, you won’t need to make any more undesirable trade-offs. CIROZANE-based products offer you a high performance, ultra-safe “drop-in” replacement to all CFC and HCFC chemistries.
CIROZANE chemistry is the result of an 18-month research effort. CIROZANE-based products offer all the performance of CFCs and HCFCs without any ozone depleting compounds.
Part No.
Size
49-ES7200
12 oz / 340 g aerosol
49-ES7208B
5 oz / 141 g BrushClean™ System
49-ES7208BE
200 ml BrushClean™ System, EU label
Flux-Off® Lead-Free Flux Remover is an extra strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, dust, grease and oil, and then evaporates quickly leaving no residues.
Part No.
Size
49-ES1697
12 oz / 340 g aerosol
49-ES897B
6 oz/170 g BrushClean™ System
49-ES897BE
200 ml BrushClean™ System, EU label
49-ES5597
55 gal. / 208 L liquid
Flux-Off® Heavy Duty is an excellent cleaner for the removal of all rosin and no clean flux types from electronic sub-assemblies, printed circuit boards and all other electronic components. Flux-Off® Heavy Duty will remove the toughest deposits of organic flux, soldering oils and organic handling oils. Flux-Off® Heavy Duty will also effectively remove other contaminants such as dirt, grease, and molding compounds.
Note: As with all vapor degreaser equipment and processes, observe all safety precautions, guidelines and operating rules associated with these units. Failure to do so may put operations personnel at risk. Avoid excessive vapor losses, loss of refrigeration, excessive boil sump heat, etc. Make sure all equipment is operated in accordance with the manufacturer’s guidelines and instructions. If in doubt, contact your manufacturer immediately.
Part No.
Size
49-ES1631
12 oz / 340 g aerosol
49-ES131
1 gal / 3.7 L container
Flux-Off® Aqueous is an extra-strength water based cleaner for flux removal in ultrasonic cleaning as well as batch and in-line cleaning systems. It is an excellent cleaner for the removal of all rosin and no clean flux types from electronic sub-assemblies, printed circuit boards and all other electronic components. This concentrated formula can be diluted 1:10 with deionized water for handling all cleaning applications. Flux-Off® Aqueous will effectively remove other contaminants such as dirt, grease, handling soils and molding compounds.
Part No.
Size
49-ES132
1 gal / 3.7 L container
Flux-Off® Complete Flux Remover is an extra strength solvent that removes heavy and encrusted flux residue. This unique solvent based formulation penetrates quickly to remove all types of flux, oxide particles, dust, grease and oil, then evaporates quickly leaving no residues.