CircuitWorks® brand’s comprehensive line of conveniently packaged and precision dispensing rework and repair products makes circuit board repair and prototyping faster, easier and more accurate. Advanced-formula materials packaged in unique delivery systems ensure superior performance and pinpoint accuracy. The full range of products meets all of the technicians needs for electronics rework and prototyping — repairing, cleaning, protecting, lubricating, bonding, and restoring electrical conductivity to circuit boards and components.
CircuitWorks® Products are compliant with IPC-7711 Rework of Electronic Assemblies, and ANSI/J-STD-001.
All CircuitWorks® branded products are available on folded blister cards complete with multi-lingual instructions and regulatory information.
CircuitWorks® Conductive Epoxy is a two part, silver epoxy used in prototype, repair and general conductive bonding applications. It features strong mechanical bonds, excellent electrical conductivity, and quick room temperature curing. CircuitWorks® Conductive Epoxy bonds aggressively to a wide variety of materials.
CircuitWorks 60 Minute Conductive Epoxy has an extended pot life for high strength conductive bonds. Components can be easily placed and replaced before full cure occurs. For accelerated cure, simply heat material to 212°F (100°C). This conductive epoxy bonds aggressively to a wide variety of materials.
Part No.
Size
49-CW2400
CircuitWorks Conductive Epoxy: Adhesive 7 g (0.25 oz.) syringe, Hardener 7 g (0.25 oz.) syringe, in blister pack
49-CW2400J
CircuitWorks 5 Minute Conductive Epoxy: Adhesive 10 g (0.35 oz.) jar, Hardener 10 g (0.35 oz.) jar, in blister pack
49-CW2460
CircuitWorks 60 Minute Conductive Epoxy: Adhesive 10 g (0.35 oz.) jar, Hardener 10 g (0.35 oz.) jar, in blister pack
CircuitWorks® Overcoat Pen is ideal for protecting and insulating circuit board traces, components, and other delicate electronics. This highly effective acrylic conformal coating provides excellent protection against shorts, moisture, abrasion, fungus, and other environmental hazards. Allows for easy repair of solder mask in prototype, manufacture and repair of circuit boards.
Part No.
Size
49-CW3300G
Green - 4.9 g (0.16 oz.) pen, blister carded
49-CW3300C
Clear - 4.9 g (0.16 oz.) pen, blister carded
49-CW3300B
Blue - 4.9 g (0.16 oz.) pen, blister carded
49-CW3300BLACK
Black - 4.9 g (0.16 oz.) pen, blister carded
49-CW3300WHITE
White - 4.9 g (0.16 oz.) pen, blister carded
The Mighty Pen® is ideal for precise removal of label adhesives, marker and ink stains, and conformal coating from printed circuit board. The unique marker tip dispenser provides controlled and exact application. The Mighty Pen® allows for quick, convenient and precise spot removal of ink, label adhesive, conformal coating and most stubborn to remove soils. The solvent evaporates quickly and provides low surface tension for superior wetting.
Part No.
Size
49-CW3700
11 g (0.39 oz) pen on blister card
CircuitWorks® Conformal Coating Remover Pen allows for quick, convenient and precise spot removal of most types of conformal coatings in seconds. The solvent evaporates quickly and provides low surface tension for superior wetting.
Part No.
Size
49-CW3500
9 g (0.32 oz.) pen on blister card
CircuitWorks® Epoxy Overcoat is a two component, 100% solids, high temperature resistant, permanent epoxy coating for electronics circuit and component protection. When properly cured, CircuitWorks® Epoxy Overcoat yields a chemically inert film which prevents the effects of corrosion, moisture, oxidation, abrasion, and thermal shock. The cured film can withstand brief exposure to high temperatures up to 600º F.
Part No.
Size
49-CW2500
Adhesive Syringe: 4 g (0.14 oz.); Hardener Syringe 3.4 g (.12 oz), in blister pack
CircuitWorks® BA Empty Dispensing Pens are offered to provide flexibility in using liquids. This unique dispensing pen allows the user to fill the pens with any liquids required, whether fluxes, flux removers, solvents, lubricants or other liquids. The body of this pen is made from durable aluminum, making it more resistant to corrosion than tin-plate dispensers. It’s large reservoir holds more material than most disposable pens, increasing use time between filling. The large stable base lets the user stand the pen on it’s end, minimizing bench space used, and it’s unique cap prevents the pen from rolling if laid on it’s side.
Part No.
Size
49-CW7000
2 empty pens per blister pack with four nibs
CircuitWorks® Lead-Free Pocket Solder is the high-purity pocket-sized solder in a convenient dispenser for rework and repair. This rosin core solder wire is manufactured from the lead-free solder alloy SAC 305. Lead-Free Pocket Solder is easy to use and produces reliable solder joints every time. Its activated pure rosin flux core eliminates troublesome solder voids. Instant wetting action provides thorough deoxidation of metallic surfaces providing the best possible surfaces for soldering.
Part No.
Size
49-S200
1.0 mm (0.04”) Diameter, 3.18 m (125”) Length
CircuitWorks® Rubber Keypad Repair Kit permanently repairs rubber keypads by restoring conductivity to worn, intermittent, and nonconductive carbon contacts. This product easily returns rubber keypads to like-new condition.
Part No.
Size
49-CW2605
Adhesive 3 g (0.1 oz.) jar, Curing Agent 0.3 g (0.01 oz.) bottle, in blister pack