Plymouth Mining Products

Jacket Repair Wrap


  • GLF - product information >
    • GLFGLF
      View Larger Image       A unique laminate of special formulated Hypalon backing and a flame retardant Mastic, possesing an extremely abrasion resistance as well as an excellent moisture exclusion properties. Designed for repairing and splicing trailing cables and conduit. The laminate is easy to apply and remains flexible at low temperatures. MSHA approval printed.
Part No. Size Color Core Packaging
14−2563 2.0" x 6' – – C/L
14−2564 2.0" x 8.5' – – C/L

  • GLF2 - product information >
    • GLF2GLF2
      View Larger Image       A special GLF laminate with an additional guideline tacky flame retardant mastic layers possesing a superior abrasion and moisture resistance. Designed for repairing and splicing trailing cables and conduit. The laminate is very easy to apply and remains flexible at low temperatures. MSHA approval printed.
Part No. Size Color Core Packaging
14−2501 2.0" x 7' – – C/L
14−2502 2.0" x 9.5' – – C/L

Rubber Mastic


  • RM (Rubber Mastic) - product information >
    • RM (Rubber Mastic)RM (Rubber Mastic)
      View Larger Image       A self-bonding rubber tape bonded to a tacky electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cables. Excellent electrical properties, superior adhesion, moisture and chemical resistance as well as surface protection.
      Continuous 90°C / 194°F, Overload 130°C / 266°F
Part No. Size Color Core Packaging
14−2625 2.0" x 10' – – C/L

GLF2 Cable Splices


  • Trailing Cable Splice Kits - product information >
    • GLF2GLF2
      View Larger Image       Use to construct a full or partial splice in single or multi-conductor portable mining cable. Four kits cover the entire range of splicing needs from 600 volt to 5kV, up to 500 KCM (connectors not included). All GLF splice kits meet the technical requirements set forth in 30-CFR § 7.404. Approval number P-7K-SK-153082-1-MSHA.
Part No. Size Color Core Packaging
14−2503 – – – –
14−2504 – – – –
14−2505 – – – –
14−2506 – – – –

Terminal Wrap


  • MINE TERMINAL WRAP - product information >
    • MTW-2MTW-2
      View Larger Image       Use for terminating three-core shielded cables to 25 kV when installing a coupler. Each kit contains three rolls of specially formulated Stress-Wrap. Packaged on 1” (25mm) wide coreless rolls. Stress-Wrap is a laminate of EPR High Voltage InsulatingTape and a special voltage gradient stressrelieving compound. U.S. Patent #4,187,389.
Part No. Size Color Core Packaging
14−9012 – – – –

Cable Repair


  • HYPALON Vulcanizable Jacketing Compound - product information >
    • HYPALONHYPALON
      View Larger Image       A vulcanizable hypalon compound that flows easily within the range of mold temperatures from 260°F - 330°F (127°C - 166°C). Bonds readily to neoprene, hypalon, PVC and NBR-PVC jackets. Chemically bonds to the original jacket without the need of a bonding agent. Provides a water-proof covering with outstanding resistance to ozone, oil, and abrasion. Quick-cure system greatly reduces mold time. Title 30-CFR 18.64 P-153-MSHA Acceptance.
Part No. Size Color Core Packaging
14−2408 1.5" x 30' Orange – C/L
14−2409 1.5" x 30' Black – C/L

Cable Preparation Kit


  • PLYPREP™ Cable Preparation Kit - product information >
    • PLYPREPPLYPREP
      View Larger Image       Plyprep is an effective and environmentally friendly cleaning kit for the proper preparation of both high and low voltage cables prior to splicing or terminating. Very effective for removing grease, oil, tar, and other contaminants from cables. Kits have everything necessary to prepare cables for a splice or termination. Each kit contains three sets of sealed wipes and one 120-grit, non-conducting, abrasive cloth.
Part No. Size Color Core Packaging
2684 – – – –

Shielding Tape


  • 17 PLYSHIELD - product information >
    • 17 Plyshield17 Plyshield
      View Larger Image       A 30 mil self-amalgamating, conducting tape for shielding High Voltage splices and terminations.
      Continuous 90°C / 194°F, Overload 130°C / 266°F
Part No. Size Color Core Packaging
14−2104 .75" x 15' – – B

  • 15 PLYBRAID - product information >
    • PlybraidPlybraid
      View Larger Image       A tinned copper mesh-knit shielding with exceptional conformability and temperature stable for replacing metallic shield in shielded cable repair.
Part No. Size Color Core Packaging
14−2230 2.0" x 10' – – B

Packaging Legend
C/L = Cellophane LabelB/L = Bag w/LabelP/C = Plastic CanB = Box

Plymouth - Home Back to Top