Cookie Consent by TermsFeed.com
NTE Logo
NTE Logo Mobile
Worldwide supplier of high quality electrical / electronic components
Call Us: +800-631-1250

Worldwide supplier of high quality electrical / electronic components

Call Us: +800-631-1250
ISO logo

Recent News & Additions

  • NTE Introduces Piezo Electric Buzzers
    LED Bargraph Display

    November 28, 2022 - NTE has just introduced a selection of Piezo Electric Buzzers. In stock and ready to ship these new buzzers are available in either Intermittent or Continuous Tone.

    Piezo Buzzers are typically used in:
    • Computers
    • Printers
    • Copiers
    • Alarms
    • Annunciator Panels
    • Kitchen Appliances
    • Diagnostic Equipment
    • Pet Training Devices
    • and much more.
    Common Features Include:
    • Round 50mm Surface Mount ABS housing
    • 26AWG (UL1007) Black and Red Wire Leads
    • Operating Voltage Range: 3-24VDC (12VDC typ.)
    • Resonant Frequency: 2700Hz ±500Hz
    • Current Draw: 12mA Max
    • Sound Output: 95dBA typ.

    NTE Introduces A New LED Bargraph Display
    LED Bargraph Display

    November 28, 2022 - NTE has just introduced a new LED Bargraph display. This unique 10 segment 3-color display features separate anode and cathodes for each segment. Essentially, there are 10 Segment LED Bar Graph LEDs housed together. Generally, these displays can be used as a battery level Indicator, in Audio equipment, Industrial Control panels and hundreds of other applications.

    This Device Features:
    • Black face
    • White fields
    • 3-RED LEDs, 3-Orange LEDs and 4 Yellow/Green LEDs
    • Low Power Requirements

    The 10 Segment LED Bar Graph, can be connected to an electronic circuit or microcontroller. It’s easy to connect LED bar graph to the circuit. It's like connecting 10 LEDs with 10 output pins. These 10-segment bar graph LEDs have many uses. With a compact footprint, simple hook up, they are easy for prototype or finished products.


    NTE Adds a New Selection of 11mm Terminal Blocks
    ECG Hot Air Rework Station

    July 6, 2022 - NTE has just added a new selection of 11mm Terminal Blocks to its offering. The new 25-B610-xx series feature a .250 Quick Connect Terminal on one side and a screw Terminal on the other side. Optional protective covers are also available. Typical applications include Robotic Arms, Solar Inverters, Fire Alarm Control Equipment, HVAC Systems, Home Appliances and more.

    Features Include:
    • .250 “Quick Connect to M4 screw
    • 11mm pitch
    • UL Registered
    • Accommodates a wide wire range 10-18AWG
    • 20 Amp, 300VAC
    • Capable of clamping a wide range of wire diameters
    • Optional protective cover or flip-type covers available
    • UL94V-0 grade fire retardant engineered plastic
    • Available with 2-9 number of pole positions

    NTE Announces the New J-HARW-1 Hot Air Rework Station
    ECG Hot Air Rework Station

    May 27, 2022 - NTE is pleased to announce a new addition to our ECG line of Soldering Tools. The new J-HARW-1 is our new Hot Air Rework station. The J-HARW-1 features adjustable temperature and air volume controls. The bright easy to read display can be changed to display either Fahrenheit or Centigrade. Smart technology places the unit in cool down mode when the heat gun is placed back in the holder. ESD safe and rapid heat up are just a few of the additional features that make this new Hot Air Rework station a great addition to your workbench.

    Features Include:
    • Adjustable temperature: 100 °C to 480 °C / 212 °F to 896 °F
    • Selectable Centigrade or Fahrenheit display
    • Air volume adjustment knob
    • LED display tubes
    • Standby mode
    • Includes 3 different nozzles
    • ESD safe
    • Rapid heat-up
    • One-year warranty

    NTE has achieved ISO9001:2015 Certification!
    ISO Logo

    May 3, 2022 - NTE Electronics, Inc is proud to announce that we have been assessed and certified as meeting the requirements of: ISO 9001:2015 certification.Our ISO 9001:2015 certificate has been awarded for the following activities: Procurement, Warehousing, Assembly and Distribution of Electrical and Electronic Components and Related Equipment.

    Specifically, to become ISO 9001 compliant, we have been independently assessed by SGS North America against internationally recognized standards showing our commitment to quality and assurance. This process required examining and documenting all of our processes and making sure through internal audits that processes are predictable and consistent. Overall, we underwent a rigorous evaluation process.

    This process includes:
    • Quality management system development
    • Management system documentation review
    • Pre-audit
    • Initial assessment
    • and clearance of non-conformances.

    All of these processes work to identify corrective actions that eliminate non-conformance to the quality management standard. As an ISO 9001:2015 certified company, NTE Electronics, Inc will follow the requirements, specifications, guidelines and characteristics set forth by this certification. Further, we will ensure that we are consistently providing processes and services that meet world-class standards.

    By achieving ISO 9001:2015 certification, we are able to anticipate the demands of our customers. Additionally, we are also able to demonstrate our commitment to providing quality of service, effective cost, and timely delivery. In spite of our certification, we will continually review our quality management system and quality policies. With this certification, we intend to provide high-quality and consistent service to our customers. Moreover, we are going to keep investing in technology, development, processes, and procedures. In order to maintain the ISO status, we will dedicate ourselves to constant improvement and development.


    NTE Adds a Convenient Stand for the Popular HG-001VT Heat Gun
    HG-001VT Heat Gun

    March 9, 2022 - NTE has just added a stand/holder for our Variable Temperature HG-001VT. The new HG-0016 stand will provide you with a hands free option when doing repetitive work.


    NTE Releases 2022 PC Version of Popular QUICKCross Software
    HG-001VT Heat Gun

    March 3, 2022 - The industry's most comprehensive electronic cross reference application for PC's has been updated.

    NTE Electronics has just released the 2022 version of their popular cross reference software program, QUICKCrossTM.
    Totally updated with the latest cross references, this new updated version also has an enhanced look and feel.
    Version 2022 contains many new NTE devices, including all semiconductors added since the last update.
    Search hundreds of thousands of devices such as semiconductors, relays, resistors, switches, potentiometers, trimmers, fuses, RF connectors, disc thermostats, terminal blocks, terminals and connectors, and more!
    Search results include links to easy-to-read, datasheet PDFs.

    New Features:
    • Redesigned screens to allow easier reading
    • Bugs and general fixes
    • Buy-now button provides instant access to inventory and pricing (when connected to the internet )
    • Optional Spanish language support
    • View Popular and New Items
    • Remain up-to-date. Software will automatically check for a new version if you are connected to the internet.

    To download your copy for PC's click on this link: https://bit.ly/3MbghP3


    NTE's New Wire Assortment Kits Now in Stock
    Wire Assortment Kits

    November 9, 2021 - They have arrived. Our Two New Wire Assortment Kits are now in stock ready to ship. These assortment kits are perfect for home, workbench, automotive, marine, RV, toolbox or anywhere repairs are needed.

    WK-1
    • Consists of 24AWG Solid Wire in 10 colors
    • 10m each of Red/Black, 5m each of White/Blue/Brown/Green/Yellow/Orange/Grey/Violet
    • Compare with Velleman: K/MOWM
    WK-2
    • Consists of 24AWG Stranded Wire in 10 colors
    • 10m each of Red/Black, 5m each of White/Blue/Brown/Green/Yellow/Orange/Grey/Violet
    • Compare with Velleman: K/MOW

    Both come packaged in a handy resealable bag with an attractive retail header.


    NTE Introduces A New Line of Self-Aligning Cable Clamps
    Self-Aligning Cable Clamps

    October 5, 2021 - NTE is pleased to announce our new line of SELF-ALIGNING CABLE CLAMPS. These Nylon 66 Cable Clamps are designed with a molded-in saddle washer to speed up installation and improve appearance. They are available in a variety of sizes both in Natural and Black.

    Features include:
    • SECURES THE ROUTING OF cables, harnesses, and hoses.
    • ROUNDED EDGES protect against insulation abrasion and cutting hoses.
    • AVAILABLE IN Natural and Black.
    • PACKAGED in 100/bag
    • SADDLE WASHER allows for quick and secure alignment.
    • MANUFACTURED from durable and flexible Nylon 66

    NTE Announces New Line of 80V ATO® Style Blade Fuses.
    80V ATO Style Blade Fuses

    September 14, 2021 - NTE is pleased to announce the addition of our new line of 80V ATO® style blade fuses. Rated at 80V, these new fuses are ideal for use in vehicle wiring looms, automotive circuits, motorbikes, agricultural machinery and electric vehicles and charging stations. These new fuses feature a three part construction with copper contacts for excellent reliability in harsh environment conditions and low voltage drop.

    Features include:
    • Current ratings from 1Amp to 40Amps
    • Interrupting Rating of 1000A @ 80VDC
    • Insulating Body: Out of thermoplastic ( UL94-V0 heat resistant)
    • Terminals: copper alloy, gal. Sn plated
    • RoHS compliant
    • filled with arc-quenching material
    • Complies with: UL248 special purpose fuses SAE J2077
    • Compare with Littelfuse 166.7000.xxxx series
    • Compare with Optifuse ANR80-xxxx series
    • Available in Bulk or multi-pack Blister
    • Manufactured in Taiwan so no tariff

    Also added was a new selection of clear in-line fuse holders for blade type fuses. These clear fuse holders provide the perfect way to spot blown fuses when your circuit uses blade fuses with LED indicators.


    NTE Introduces New Self-adhesive Wire Clips
    12V SPST Toggle Switch 54-748

    August 17, 2021 - NTE is pleased to announce its new line of Self-adhesive Wire Clips. These Nylon 66 wire clips are easy to install, simply peel and stick. Available in a variety of sizes, natural and black, they adhere to most surfaces.

    Features include:
    • GREAT CABLE ORGANIZER perfect for organizing network cables, audio cables, video cables, USB cables, auto charging cables and cable runs, in data centers, at the office, home or car.
    • TAME THOSE wires and cables in your new remote office space.
    • AVAILABLE IN Natural and Black.
    • PACKAGED in 50/bag
    • WORKS WELL ON all smooth and clean surfaces including desks, walls, baseboards, cabinets, wood, ceramics, etc.
    • STRONG ADHESIVE they are made of eco-friendly premium PA66 material and strong adhesive tape.
    • THEY ARE EASY to install and remove without leaving any residue.
    • THEY ARE releasable so you can easily add/remove the wires

    NTE Announces the New 12V SPST Toggle Switch 54-748
    12V SPST Toggle Switch 54-748

    May 5, 2021 - NTE is pleased to announce the availability of our new 54-748. This new 12V SPST Toggle Switch is unique in that it features a RGB LED ring.

    Features include:
    • SPST On-Off
    • IP67 rated
    • 16mm mounting hole
    • Rating: 20A 12VDC, 15A 125VAC
    • LED rated for 12VDC
    • LED RGB ring is independent of switch
    • Gold plated terminals include quick connection color coded wires
    • Chrome plated bezel and actuator

    NTE Announces the New ECG Brand DM-817 Digital Auto-Ranging Multimeter
    DM-817

    April 26, 2021 - NTE is pleased to announce the availability of our new ECG brand DM-817 Digital Auto-Ranging Multimeter. This new 6000 count 3 5/6 digit, 9 function DMM is easy to use and provides all the functionality you need. The New DM-817 joins our immensely popular DM-850 economy meter.

    Features include:
    • 9 Functions: DC Voltage/DC Current, AC Voltage/AC Current, Resistance/Capacitance/Frequency/ Temperature and Diode-Continuity checker
    • DC and AC Currents up to 10A
    • DC Voltage to 1000V and AC Voltage up to 750V
    • Data Hold function
    • 3-5/6 Digit Backlight LCD Display for visibility in dimly lit areas
    • Auto Power Off
    • Carrying Case, Battery and Test Leads( standard and temperature ) included
    • Protective holster with tilt stand
    • Shipped in attractive sealed hang up clamshell

    NTE Introduces Two New Power Transistors
    NTE Power Transistor

    December 23, 2020 - NTE has just introduced two new Power Transistors. The NTE2697 and NTE2698 are electrically similar NPN Silicon Transistors, but in two different case styles.

    Features:
    • BVcbo: 200V
    • BVceo: 120V
    • Ic: 7A
    • Pd: 50W/70W NTE2697/NTE2698
    • TO-220/TO-3PN NTE2697/NTE2698

    They are designed for use in DC/DC converter applications, humidifiers and general purpose applications. Compare with: 2SC3834 and 2SC3835

    For a complete datasheet click on these links: NTE2697 and NTE2698


    NTE Introduces LED Ultraviolet Blacklight Flashlight
    LED Ultraviolet Blacklight Flashlight

    December 9, 2020 - The industry standard ECG brand is now offering this high-quality LED ultraviolet blacklight flashlight. Constructed with an Air-craft grade aluminum alloy body and anti-abrasive anodizing surface treatment, this light weight and durable blacklight flashlight uses 51 UV LEDs, which are 30% brighter than other lights, allowing detection of a larger area with a brighter light.

    What UV flashlights are used for:
    • Checking for pet and rodent urine stains
    • Searching for insects and reptiles (e.g. scorpions)
    • Forensics & counterfeit verification
    • Mineral & gemstone observation
    • Checking hotel rooms for cleanliness

    NTE adds Custom Thermo-Pad for 20mm star LEDs
    Thermo-Pad for 20mm star LEDs

    November 11, 2020 - NTE has just added a new Self-Adhesive Thermo-Pad to its line. The new TP0014 joins our already popular line of thermo-pads and is specifically designed to fit our NTE30180-xx series of 3W High-power LEDs. These pre-cut, thermally conductive, electrically isolating, pressure sensitive adhesive pads are precision cut to fit the 20mm Star Base LEDs. Pre-cut pads make it easy to fasten the base directly to a heat sink without the need for screws or fasteners.

    Pricing is per sheet. Each sheet includes 12 pre-cut pads

    Each pad is hexagonally shaped and is 0.8" (20.32 mm). The TP0014 is supplied and priced for sheets of 12, and comes with adhesive on both sides. Simply remove the backing on one side, apply the pad to the back of the LED, then remove the backing on the other side and press into place on your heat sink.


    Kester Introduces New 278 Flux-Cored Solder Wire
    Kester 278 Flux-Cored Wire Solder with Innolot Alloy

    November 2, 2020 - Kester has just introduced new 278 Flux-Cored Wire Solder with Innolot Alloy.

    Kester 278 Flux-Cored Wire with Innolot Alloy is a halogen-free wire optimized for high performance applications, such as under-the-hood automotive. 278, with its fast wetting and low spattering, performs admirably when benchmarked against conventional halogen/halide-based systems, enabling its use in drag soldering and minimizing cycle time in robotic and manual soldering. The use of 278 results in a clear post-soldering residue without the need for cleaning. 278 is classified as Type ROL0 flux under J-STD-004B specifications. 278 is halogen-free and halide-free, conforming to the strictest requirements of IEC 61249-2-21, JPCA-ES-01 and IPC-410B specifications.

    Features Include:
    • Very low flux spatter
    • Excellent wetting speed; superior to halogenated materials
    • Low smoke and odor
    • Clear, non-tacky residue, resulting in excellent joint aesthetics
    • RoHS Compliant
    Key Attributes:
    • Solder Joint reliability for applications with peak temperature as high as 150 deg. C
    • Improved thermal management due to inherent creep resistance properties
    • Improved performance in harsh environment applications such as under-the-hood automotive, Advanced Safety Devices (ADAS) high power LED and avionics/aerospace.
    • Reflow at temperatures equivalent to SAC305

    NTE Now Offers USA Made Hand Sanitizer Gel
    3 Watt Star Base LEDs

    September 15, 2020 - NTE is happy to be working with NovaGel to provide high quality hand sanitizer. This product is uniquely formulated to ensure the safety and well being of your customers. NovaGel is a professional grade of Hand Sanitizing Gel that utilizes 70% ethyl alcohol and moisturizing properties.

    Features Include:
    • Made in USA
    • 70% Ethyl Alcohol
    • Moisturizing Formula
    • Un-scented
    • FDA Registered
    • Available in 3 sizes: 2oz./8oz./16oz.

    NTE Announces 3 Watt Star Base LEDs
    3 Watt Star Base LEDs

    August 31, 2020 - NTE has just added a new series of High Power 3 Watt LEDs to its offering. 3W High Power LEDs are brighter than standard incandescent and halogen light bulbs and are perfect for automotive, industrial, decorative lighting, architectural lighting, and hobby applications. Not only are they bright, they also consume a fraction of power making them extremely energy efficient. The high power LED is mounted onto an aluminum PCB heat sink to provide heat dissipation. Simply connect the large + and - pads on the heat sink to activate the LED.

    Features Include:
    • Water Clear Lens
    • 20mm x 20mm Star Base Aluminum PCB
    • Available in White, Warm White, Red, Green and Blue

    NTE Announces New ECG Brand DM-850 Digital Multimeter
    DM-850 Digital Multimeter

    June 30, 2020 - NTE is pleased to announce the availability of our new ECG brand DM-850 Digital Multimeter. This new 3 1/2 digit, 6 function DMM is economically priced to fit all budgets, yet provides features found in many higher priced models.

    Features Include:
    • 6 function : DC Voltage/DC Current/AC Voltage/Resistance/Diode-Continuity checker/hFE test
    • DC currents up to 10A
    • DC and AC Voltage up to 600V
    • Data Hold function
    • Backlight
    • Battery and Test Leads included
    • Protective holster with tilt stand
    • Shipped in attractive sealed hang up clamshell
    • Compare with Velleman model DVM850BL

    NTE Has Added Heat Shrink End Caps to its Offering
    Heat Shrink End Caps

    June 19, 2020 - NTE is pleased to announce the addition of Heat Shrink End Caps to its line. These have been popular requested items and NTE is glad we are now able to offer them. These heat shrinkable end caps are lined with hot melt adhesive to provide electrical insulation, waterproof sealing and resistance to chemicals and abrasion.

    Features Include:
    • Inside dia. from 12mm (.472") to 75mm (2.95")
    • Excellent electrical and chemical properties
    • Waterproof
    • Operating temp: -55°C to +125°C
    • Minimum shrink temperature: 100°C
    • Perfect for power cable and telecommunication applications when being stored, transported and installed
    • RoHS compliant
    • Material: Polyolefin

    NTE - New Product Announcement - R185 Series
    R185 Series Relays

    June 10, 2020 - NTE is pleased to announce the introduction of our new R185 series Hi-Amp Thermal Circuit Breakers. This new series consists of 14 values and are typically used in auxiliary and accessory circuits in truck, bus, marine and RV electrical systems.

    Features Include:
    • Current ratings from 25 Amps up to 150 Amps
    • Manual Reset
    • Push-to-test switch
    • Single Pole
    • IP67, water resistant, splash and dust proof housing
    • 1/4-28 threaded studs
    • Surface mount, protective stud insulator included
    • Ignition protected
    • Compare with Bussmann 185 Type III series

    NTE - New Product Announcement - NTE30116
    NTE30116 IR LED Emitter

    June 2, 2020 - NTE has just announced the introduction of its NTE30116 5mm IR LED emitter. Infrared LEDs are used for remote controls. They are usually found in the part you point at your TV and in 'night-vision' cameras. The NTE30116 utilizes the 940nm wavelength. That is the wavelength that most infrared receivers listen to. They work great for any kind of remote control application.

    Features Include:
    • Infrared 940nm peak wavelength
    • 5mm round head with flange
    • Tinted blue lens
    • Vr = 5V
    • 20 degree viewing angle
    • Continuous forward current rating of 100mA
    • Peak forward current rating of 1A (pulsed)

    NTE Rolls Out Update for QUICKCross Software
    QUICKCross

    May 7, 2020 - The industry's most comprehensive electronic cross reference application for PC and MACs has been updated.

    NTE Electronics has just updated the PC and MAC versions of its popular cross reference software program, QUICKCrossTM.

    Changes include:
    • Totally updated cross reference database
    • Minor cosmetic updates
    • Minor bug fixes

    NTE’s extensive cross reference database enables you to effortlessly find a suitable alternative for over 500,000 industry part numbers.

    Products such as:
    • Semiconductors
    • Resistors
    • Relays
    • RF Connectors
    • Terminals and Connectors
    • Switches
    • Fuses
    • and much more........

    This data has been compiled from over 40+ years of knowledge supplying electronic components. To download simply click on this link and select your version. https://www.nteinc.com/quickcross/


    NTE's ECG DIT-205 Digital Infrared Non-Contact Thermometer
    DIT-205 Digital Infrared Thermometer

    April 28, 2020 - NTE's DIT-205 Digital Infrared Thermometer is perfect for these trying times. This pen-style IR thermometer fits easily in your pocket for quick and easy temperature measurements.

    Features Include:
    • Temperature Range: -27°F to 428°F
    • Selectable temperature F / C
    • LCD disply
    • Non-contact
    • Does not use laser beam
    • Dimensions: 3.25" x 0.5"
    • Metal alloy case for increased durability.

  • NTE Announces the New NTE31000 IR Receiver Module for Remote Control Systems
    NTE31000 IR Receiver Module

    March 16, 2020 - NTE has just announced the introduction of its NTE31000 IR Receiver Module for Remote Control Systems. This miniaturized receiver is designed for infrared remote control systems. It consists of a PIN diode and a preamplifier in one package. The epoxy package acts an an IR filter.

    Features Include:
    • Very low supply current
    • Photo Detector and Preamplifier in one package
    • Compatible with NTE30116 ( blue tint lens) and NTE30047 (clear lens) IR LEDs
    • Supply Voltage: 2.5V to 5.5V
    • Improved immunity against ambient light

    NTE Adds New Selection of Light Dependent Resistors to its Product Line
    Black Nylon Cable Clamp - Ladder Style

    March 13, 2020 - NTE has just added a selection of Light Dependent Resistors ( Photoconductive Cells ) to its product line. They are small, inexpensive, use low-power, are easy to use and do not wear out. They are sometimes referred to as CdS cells since they are made of Cadmium-Sulfide.

    Typical Applications Include:
    • Ambient light detecting
    • Camera auto exposure control
    • Backlight control
    • Light Adjusting applications
    • Night Lights
    • Street lights
    • Flame detectors
    • Light controlled switch
    • Light controlled electronic toys and much more.

    NTE's Ladder Type Clamps Available in Natural and Black
    Black Nylon Cable Clamp - Ladder Style

    February 6, 2020 - NTE has added black to its selection of Ladder Style Adjustable Nylon Cable Clamps. Available in 3 different sizes, these clamps are easy to install and will adjust to fit a variety of bundle diameters.

    Features Include:
    • Adhesive backed for quick surface mounting
    • Nylon 6/6
    • Easy to install, open and close for unlimited usage
    • Includes mounting hole for #6 screw for use on surfaces where adhesive is not suitable

    NTE Reintroduces NTE5699 800V, 25Amp TRIAC Semiconductor
    NTE5699

    February 3, 2020 - NTE has just reintroduced a device that was discontinued some years back. The NTE5699 is 800V, 25Amp TRIAC in a TO-220 Fully Insulated package. It is designed primarily for full-wave AC control applications, such as lighting systems, heater controls, motor controls and power supplies. Wherever full wave silicon gate controlled solid state devices are needed.

    Features Include:
    • Blocking Voltage- 800 Volts
    • Gate Triggering Guaranteed in Four Modes
    • IT(RMS): 25A
    • ITSM: 250A
    • TO-220F Full Pack
    • IGT: 50/75mA

    Connect your LED Strips with these Hippo Clips from NTE
    4-lead RGB LEDs

    January 27, 2020 - NTE's new selection of Hippo Clips are the easy way to make a long lasting electrical connection when installing flexible LED strips. No matter if you are connecting two strips in series, or if you need to add power to a previously cut LED strip, NTE has the correct version. 2835, 3528, 5050, IP20, IP65 NTE's hippo clips fit them all.


    NTE Launch's Enhanced Distributor Portal
    NTE logo

    December 10, 2019 - NTE has just launched our enhanced distributor portal.

    With the addition of a new dashboard feature, NTE distributors now have instant access to all their company orders/invoices/tracking numbers and volume quotation requests in one easy to comprehend view. Add in the company metrics feature in the lower panel, NTE distributors can also compare their YTD to LYTD purchase activity.

    Don't have a secure log-in yet? Contact our sales department at: sales@nteinc.com


    NTE Adds New 4-Lead RGB LEDs
    4-lead RGB LEDs

    December 5, 2019 - NTE has just added these incredible 4-lead RGB LEDs to its line. From one single High Brightness LED, you can get all 3 colors and use them as a status indicator, or get really creative and add a PWM circuit and obtain an infinite amount of colors.

    Features Include:
    • 5mm and 10mm sizes
    • Common Anode or Common Cathode configurations
    • Water Clear or White Diffused Lens
    • Compare with Adafruit 302 and 848 or Sparkfun COM-00105

    For detailed information click on these links: 5mm or 10mm


    NTE Has a Large Selection of Cooling Fans
    3-Phase Bridge Rectifiers NTE53504

    November 23, 2019 - With our broad selection we think you will find a fan or accessory to fit most popular applications.

    Features Include:
    • Ball Bearings
    • DC: 12V and 24VDC
    • AC: 100-125VAC
    • All are RoHS compliant
    • Most are UL recognized
    • Locked Rotor Protection
    • Many feature Wire Leads or Terminals
    • Sizes: 40x40mm, 60x60mm, 80x80mm, 92x92mm and 120x120mm
    • Available in Bulk or our attractive Clam Shell for Retail Sales
    Accessories Include:
    • Metal Fan Guards
    • Fan Filters
    • Fan Cords from 12" to 72"

    NTE Introduces New Series of 3-Phase Bridge Rectifiers
    3-Phase Bridge Rectifiers NTE53504

    November 12, 2019 - NTE has just introduced a new series of 3-Phase Bridge Rectifiers. The new NTE53504 series is a selection of Glass Passivated 35 Amp 3-phase bridge rectifiers in a compact epoxy case with the heat sink internally mounted in the bridge encapsulation.

    Features Include:
    • Glass Passivated Die Construction
    • Low Forward Voltage Drop
    • High Current Capability
    • High Reliability
    • Quick Connect Terminals
    • Through Hole Mounting with #10 Screw
    • Ideal for PCB

    NTE adds the NTE7096-1 Integrated Circuit to its Product Line
    NTE7096-1 Integrated Circuit

    October 31, 2019 - This new device is a High Performance Current Mode PWM Controller. This device provides all the necessary features to implement off-line or DC to DC fixed frequency current mode control schemes with a minimal amount of external parts. The NTE7096-1 is a high performance version of our popular NTE7096.

    Features Include:
    • Trimmed Oscillator for Precise Frequency Control
    • Oscillator Frequency Guaranteed at 250kHz
    • Current Mode Operation to 500kHz
    • Automatic Feed Forward Compensation
    • Latching PWM for Cycle-by-Cycle Current Limiting
    • Internally Trimmed Reference with Undervoltage Lockout
    • High Current Totem Pole Output
    • Low Start-up and Operating Current
    • Compare with UC3842 series

  • Edge Group Presents Best Supplier Customer Service Award to NTE
    Edge Group logo

    October 28, 2019 - At the EDGE Conference in Chantilly, Virginia on Monday October 28, 2019, NTE Electronics Inc was presented with the Best Supplier Customer Service Award from the EDGE members. The “Above and Beyond” award was presented to the Preferred Supplier that delivers the most superior customer service including both inside and outside representation.

    This award was based on the results of a survey by The EDGE Group to its 120 independent distributor members. The award was presented to Vice President, Bill Horstmann, and National Sales Manager, Cindy Habick, by Melissa Sealy COO of The EDGE Group.

    The EDGE Group, located in Houston, TX is a distributor-owned buying and marketing group serving multiple Electronic MRO and OEM industries. EDGE has a membership of over 120 independent distributors with more than 1,000 stocking locations throughout the U.S and Canada.

    Congratulations to all those at NTE who make this possible.


    New Clips and Test Lead Product Line
    Steel Alligator Clip 72-190

    October 22, 2019 - NTE Adds the 72-190 to its Clips and Test Lead product line. This new Copper plated Steel Alligator clip is rated up to 80 Amps It comes as a set of 2. One with a Red PVC insulated handle, and the other with Black.


    NTE Launches New Website to Coincide with 40th Anniversary
    40th Anniversary

    October 21, 2019 - We are excited to share with you our totally redesigned website. With a bold new look and enhanced navigation we hope you like the new format. In conjunction with its 40th Anniversary (1979-2019) NTE Electronics, Inc has just launched its totally new public web site. This new site has been redesigned from the ground up to take advantage of current guidelines and best practices. We’ve consolidated product information so you can find product information, images and specifications faster, and easier to navigate. Check it out today at: www.nteinc.com


    Flexible LED Strip Mounting Clips
    Flexible LED Strip Mounting Clips

    July 27, 2019 - NTE Adds these handy new LED strip mounting clips to its line. These clips help in those situations where the original mounting tape does not seem to adhere securely to the mounting surface. It will also give new life to LED strips that were removed or need to be repositioned. With 2 widths, and 2 height dimensions for IP20 and IP65 versions, these mounting clips are a must have for anyone that does LED Strip installations on a routine basis.


    6-Wire and 12-Wire Slip Ring with Flange from NTE
    Slip Ring with Flange

    July 15, 2019 - NTE Adds these two new items to its line. These 6-wire and 12-wire slip rings were designed to allow the transmission of power and electrical signals from a stationary to a rotating structure. Inside the plastic tube are gold-plated slip rings for either the 6-wire or the 12-wire version. There are six/twelve color coded wire sets made of 26AWG and no matter how you twist or turn the assembly, they will remain in continuity. Each slip ring is capable of handling a rotation speed up to 250RPM and each of the wire sets can carry up to 2A at up to 240VAC or 240VDC.


    NTE Adds R11 Series 15 Amp Plug-in Relays to its Offering
    R11 Relay

    June 7, 2019 - NTE Adds the R11 series of General Purpose, 15 Amp, SPDT AC & DC Full-Feature Electro-mechanical relays.

    Features:
    • 15A max.- ideal for automation control panels
    • 14mm width slim design saves valuable space
    • See-thru plastic cover
    • Plug-In Terminals with socket mount option
    • Indicator Lamp option (N-suffix)
    • Locking test button/indicator lamp option (BN-suffix)
    • Mechanical flag indicator displays relay status during testing or operation
    • High reliability, 10 million operations
    • Compare with IDEC RH1B series and Schneider 781R series

    New RF Connectors Announcement
    RF Connector

    May 14, 2019 - Our new line of RF Connectors has been officially launched. Product is here and available for purchase.

    The initial offering for this new line will include the following types:
    • BNC
    • N
    • SMA
    • TNC
    • UHF
    • and more

    NTE connectors are manufactured at a state-of-the-art factory in Taiwan. What that means for you and your customers is high quality product, with fair pricing and NO TARIFFS. No guessing if the country of origin is China. No guessing if there is a tariff included in the price or it will suddenly appear when you are invoiced.


    NTE Introduces 2 New ECG® Brand Solder Stations to its Existing Line
    ECG Solder Staion J-SSD-2

    May 26, 2019 - The ECG division of NTE Electronics Inc., Adds 2 new higher-end Solder Stations to its offering. The J-SSD-2 and the J-SSD-3 are targeted at those users who require more professional features in their day-to-day use. These new units complement the more economical versions NTE already markets. In stock and ready to ship. All stations are RoHS compliant, CE approved with a UL plug and cord. They come packaged in attractive, color coordinated gift boxes that match the color scheme of the other ECG Soldering and Heat products. Replacement irons, tips and additional tips will also be available.

    The ECG model J-SSD-2 is a digital 75W Industrial Soldering Station, ESD Safe. Rapid heating, Intelligent temperature control, Digital LED display, Sleep state / Automatic shutdown, Celsius / Fahrenheit selectable. Adjustable temperature range: 200°C to 450°C / 392°F to 842°F + -10%. The J-SSA-2 also features an easily replaceable soldering iron.

    The ECG model J-SSD-3 is a Digital 75W Industrial Soldering Station, ESD Safe. 3 programmable temperature settings, Intelligent temperature control, Temperature calibration, Sleep state /Automatic shutdown / Alarm, Rapid heating with Celsius / Fahrenheit selection, Adjustable temperature range: 200°C to 480°C / 392°F to 896°F + -10&percent;. The J-SSA-3 also features an easily replaceable soldering iron.


    Stainless Steel Conductive Thread
    Stainless Steel Conductive Thread WW-1

    March 28, 2019 - NTE Adds Stainless Steel-316L Conductive Thread to its offering. The new NTE P/N: WW-1 is the perfect thread to use when looking to build circuits into your clothing or projects.

    This thread is 2-ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project. It also has low resistivity, 16 ohms per foot so you can use it to drive LEDs and other electronic components that use under ~50mA.

    Conductive thread can carry current the same way that wires can, which means it can be used to create a circuit. This allows the user to sew a circuit together, creating flexible circuits that require no soldering. In some e-textile-based projects, this is the most practical tool to maintain the hang of the fabric.

    Educationally, it's a very safe and uncomplicated way to learn how to use embedded electronics.

    The WW-1 comes wound on a small metal bobbin and contains 23 meters/75 feet.


    NTE Parts Direct Announces Addition of Plymouth Rubber Tape Line
    Plymouth Tape Logo

    February 8, 2019 - www.ntepartsdirect.com has just announced it will now be offering electrical tape and related products from Plymouth Rubber. This new agreement will now provide you access to a worldwide manufacturer of electrical tape and related products, in the quantities you prefer. Plymouth Rubber was established in 1896 manufacturing all sorts of rubber products. They are recognized worldwide for their quality and their continuous commitment to developing new products to meet the need of their customers around the world.

    Some highlights of this new line are:
    • Vinyl and Electrical tapes packaged in cellophane or plastic can
    • Friction and Duct Tapes
    • Low Voltage Rubber Tape
    • Insulating Mastics for protection and sealing
    • High Voltage Insulating Tape w/liner and w/o liner
    • Tinned Copper Shielding Tape and Tinned Copper Braid
    • Silicone Rubber Tape
    • Glass Cloth Tape
    • Arc and Fireproofing Tape
    • Neoprene Jacketing Tape
    • and much more

    Click here for a direct link to the Tape landing page on NTE Parts Direct: Plymouth Tape


  • NTE Adds Closed End Sealed Solder Splices
    Plymouth Tape Logo

    December 28, 2018 - NTE Adds Closed End Sealed Solder Splices to its Terminals and Connector Line. These new splices feature a heat-shrinkable thermoplastic sleeve containing a spiral-wound copper insert. The insert is fitted with a pre-fluxed solder band. The new 76-CESS-X line of Closed-end Sealed Solder Spices are color-coded for easy identification. Simply determine the wire combinations (numbers of wires and size) of wire bundle you wish to splice and then use the gauge shown in the table below to select the correct connector. These new items are available in 5pc blister packs or bulk.


    NTE Adds 4 New LED Strip Connectors
    LED Strip Connectors

    November 15, 2018 - NTE Adds 4 new LED strip connectors specifically designed to tackle the task of wiring and connecting those double density LED strips.

    Designed specifically for the 2835 and 3528 size, 600 LEDs per reel versions, these 4 new strip connectors come in two different versions and two different IP ratings.

    The 69-A21 and the 69-A23 are IP20 rated and the 69-A20 and the 69-A22 are IP65 rated. Their easy press-to-connect feature makes the task of adding the power wires or connecting two strips fast and easy.

    Features Include:
    • 12 VDC, Dimmable
    • Non-waterproof IP20 or Water-resistant (IP65) versions
    • 3M Adhesive tape backing
    • All include pre-wired 2.1mm x 5.5mm DC connector
    • 2 LED densities available: 300 or 600 LEDs per reel
    • Available colors include: White, Warm White, Red and Blue
    • Pre-packaged starter kits also available

    NTE Now Carries Surehold's New Wire Glue
    Surehold Glue 78-SH-455

    October 11, 2018 - Surehold has just introduced their latest product. The 78-SH-455 is Electrically Conductive WIRE GLUE designed to bond low voltage electrical connections.

    It connects wires together in one simple step….. then conducts electricity. Wire Glue is an electrically conductive water-based adhesive for use as a replacement for soldering in most types of low voltage, low current electrical connections both indoors and outdoors. The 78-SH-455 Wire Glue features durability and weather protection from the elements. It is also chemical and oil resistant. It is suitable for both AC and DC circuits.

    QUICK! RELIABLE! SAFE!
    No Heating One easy step for Lead free
    No Soldering a permanent bond Non-toxic

    Great for:
    • Repairing wires and connections
    • Repairing Solar Cell leads
    • Hobby, robotics and science projects
    • Prototyping circuits
    • Flexible LED strip PCB repairs
    • DIY home repairs

    New 35A Bridge Rectifiers
    Bridge Rectifier nte53022_28

    September 6, 2018 - NTE has just introduced new 35 Amp, Glass Passivated Full Wave Single Phase Bridge Rectifiers to the line. With just these 3 items you can replace all 35 Amp Bridge Rectifiers from 50 Volts though 1000 Volts.

    Features Include:
    • Glass Passivated Construction
    • Low Reverse Leakage Current
    • Low Power Loss, High Efficiency
    • Mounting: Through Hole with #10 Screw
    • Heatsink Integrated Epoxy Case for Max Heat Dissipation
    • Low Thermal Resistance
    • High Surge Capability
    • Alternatives to KBPC35 series, GBPC35 series, BR3500 series and many more!
    • RoHS Compliant

    NTE Introduces New EL Chasing Wire
    El Chasing Wire

    September 14, 2018 - NTE has just announced the addition of EL Chasing Wire to its comprehensive line of LED Strips, EL Wire and Lighting products. Using the same principles and construction as the original EL Wire we introduced back in 2016, this new version works the same, but with one big difference. It chases!

    By utilizing multiple cores this EL Chasing wire adds an eye-catching effect to the world of Electroluminescent wire. You will see the glowing colored light seem to move along the length of the wire seemingly flowing out the end.

    Speed control and/or Forward and Reverse Flashing incorporated into some of the power supplies allows for custom effects. These new items are in stock and ready to ship.

    Features Include:
    • Operates on AC voltages 90 - 120VAC unlike LED Strips, which operate on DC voltages
    • Available in 2.3mm and 3.2mm Diameters
    • Standard 9.84 Ft. (3 Meter) length with Pre-Wired Connector
    • Extremely flexible, can be bent, knotted, cut, stretched, etc. without compromising the lighting effect
    • Can be mounted to almost any decoration surface using transparent adhesive tape, glue, clips, thread, etc.
    • Environmentally Friendly and Energy Saving, uses 50 - 70% less energy than LED lamps, 20 - 40% less than Rope Lighting, and 1 - 10% less than Neon Lighting
    • 5 different power supplies available (1-battery powered, 2-12VDC powered, and 2-AC powered
    • Multiple connectors and splitters available.
    • Available Colors include: Red, Blue, Transparent Blue, Green, Transparent White, Yellow/Green, Orange, Pink and Purple

    NTE Adds New Value Line Flexable LED Strips
    LED Value Line Flexable LED Strips

    August 23, 2018 - We are happy to introduce the latest addition to our line LED lighting products. This new line of LED strips includes all the great features of our original line but at a much lower price point.

    These new LED strips feature high brightness 3528 LEDs and come in standard 16.4ft (5m) length.

    Features Include:
    • 12 VDC, Dimmable
    • Non-waterproof IP20 or Water-resistant (IP65) versions
    • 3M Adhesive tape backing
    • All include pre-wired 2.1mm x 5.5mm DC connector
    • 2 LED densities available: 300 or 600 LEDs per reel
    • Available colors include: White, Warm White, Red and Blue
    • Pre-packaged starter kits also available

    NTE Adds Two New AC-DC Regulated Power Supplies to its Offering
    Capacitor 165V MSC Series

    December 4, 2017 - NTE has just added two new AC-DC Regulated Power Supplies to its offering. The 57-U1 and 57-U2 are universal voltage selectable power supplies.


    NTE Has Added New Dual Loop Cable Ties to its Product Offering.
    Dual Loop Cable Ties

    June 26, 2018 - These new Cable Ties are designed to mount and wrap two separate bundles of hoses, wires, or tubing, in parallel to protect them from abrasion and chafing.

    Features Include:
    • Increased flexibility and toughness
    • Impact resistant material prevents cracking and breaking due to repeated high impacts and vibration
    • 150lb. tensile strength for heavy duty applications
    • Heat stabilized to provide high operating temperature of 230°F
    • Mounting hole provides option of securing bundles in heavy duty equipment
    • Weather resistant UV Black for outdoor use and sun protection
    • Packaged 50 per bag
    • 1/4" bolt size

    NTE Adds White Split Loom to its Color Offering
    Dual Loop Cable Ties

    November 22, 2017 - Available in 6 different diameters, this new color joins our previous offering of Orange, Green, Red, Yellow and of course standard Black.

    As always NTE split loom is available in 100, 10 and 5 foot lengths.


    NTE Adds New Cable Ties for Solar and Cold Weather Applications
    Cold/Solar Cable Ties

    October 18, 2017 - NTE Adds two new distinct types to its popular line of cable ties.

    Solar application Cable Ties specially formulated for solar applications to withstand the harsh rays of the sun and corrosive outdoor elements.

    • Available in UV Black Nylon 12 they feature low water absorption properties
    • Ideal for galvanized steel surface contact
    • Chemical resistant and insensitive to stress cracking
    • Made in the USA

    Cold Weather application Cable Ties specifically formulated to withstand long periods of exposure to sub-zero temperatures before or after installation.

    • Available in UV Black Nylon
    • Prevent downtime replacing ties from cracking or breaking from extreme cold temperatures
    • Increased flexibility and toughness
    • Impact resistant and UV weatherable
    • Made in the USA
    • UL approved for installation performance at -20°C and application temperatures down to -40°C


    NTE is Happy to Announce the Addition of 165VAC Versions to its Line of Motor Start Capacitors
    Capacitor 165V MSC Series

    August 23, 2017 - These 165VAC voltages are perfect in applications where you wish a slightly higher rating than our 125VAC version, but the case size of the 220VAC type is simply too large. This new series is in stock and ready to ship.


    NTE Adds Two New Semiconductors to its Offering, NTE6249 and NTE6250
    Semiconductors NTE6249 and NTE6250

    June 8, 2017 - NTE has just added two new semiconductors to its offering. NTE6249 and NTE6250 are 200 Volt and 800 Volt respectively, 10 Amp Glass Passivated Ultrafast Rectifiers.

    Typical applications include High Frequency Switched Mode Power Supplies (SMPS), Inverters and as Free Wheeling diodes.

    They Feature:
    • Glass Passivated Die Construction
    • Ultrafast 50 nS and 100 nS reverse recovery time
    • Low Forward Voltage Drop
    • Low Reverse Leakage Current
    • Fully Molded Plastic TO-220 two lead package
    • High Surge Current Capability
    • RoHS Compliant

    NTE Adds SureHold® Cyanoacrylate Adhesive to its Offering
    SureHold Cyanoacrylate Adhesive 78-22021

    June 8, 2017 - The dual bonding technology combines a premium high quality glue with a blazingly fast light cure.

    Features & Benefits:
    • Dual Cure System; Instant & Photo-cure
    • Industrial Strength
    • Extremely fast, tack-free curing in 2-5 seconds
    • Cures with UV/Visible light
    • Bonds & Fills Gaps
    • Good for sensitive electronic assemblies
    • Cures in shadowed areas
    • Eliminates need for accelerators
    • Can be used as a coating
    • Can be used for OCA Applications

    NTE Introduces Chemtronics line of Chemicals and Production Tools
    Chemtronics Logo

    February 10, 2017 - NTE is pleased to announce that it has reached an agreement with ITW to provide NTE Distributors with access to the Chemtronics line of chemicals and production tools. Since 1958 Chemtronics has been at the forefront of the electronics maintenance and repair industry. The product offering has grown from a handful of cleaners, to a complete line of ultra-pure solvents, swabs and wipes, precision rework and repair tools for the electrical, electronics and telecommunications industry. In 1999 Chemtronics became a wholly owned subsidiary of Illinois Tool Works Inc.

    With the addition of the Chemtronics line, NTE distributors will now have unprecedented access to 4 of the industry’s premier names in the electronics maintenance and production industry directly from NTE:

    • Chemtronics
    • Techspray
    • Plato
    • Kester

    This unique offering will allow NTE distributors to combine orders for any of these great brands along with NTE and ECG Brand products on one Purchase Order. Combine these products with your regular orders to meet minimum purchase order amounts faster, and purchase in broken case quantities to limit inventory exposure.